| |
Figures 1, 2 and 3 show that
the efficiency improved with decreasing split width and with increasing
throat velocity. The scrubbing water volumes remained constant.
| Figure
3: |
Collection efficiency curves at gas flow rate of 150 m3/h
and water flow of 200 l/h. |
The volumes of scrubbing water used has an important influence on the collection
efficiency. The maximum scrubbing water volumes is 200 l/h with nozzle pressure
of 4 bar. Figure 4 demonstrates the impact of water volume on the same split
width and Figure 5 shows the effect of different split widths. |
|
|
